Dedicated line delivery device
Introduction of major products of BuRim Co., Ltd.
Dedicated line delivery device
Introduction of major products of BuRim Co., Ltd.
BR-CSU153(ETH)
CSU
BR-CSU153(ETH) is single-port fractional T1/E1 and CSU equipment which can be connected to T1/E1 service. It has a transmission speed enabling synchronous data channels and programs. The usable speed is 56Kbps / 64Kbps or higher. This system can transmit signals of voice, data and video to users who need transmission bandwidth of 1.544Mbps in case of T1 and 2.048Mbps in case of E1 after dividing them with N×24, N×30/31 multiples. Eff ective data of DTE are sent carried in TimeSlot corresponding to T1 or E1 data fl ow. BR-CSU153 (ETH) is highly compatible with other systems and has remarkable expandability of DTE interface. It also can be applied to various forms of communication through adding Ethernet ports.
· Network Diagram
· Product Features
Fractional T1/E1 Interface
Choose transmission speed between Nx56 or Nx64k bps
It is possible to control and repair and maintain front panels
and consol ports
Can operate D4 (SF) or ESF frames while operating T1
Can operate ESF with CRC-6 frames while operating T1
The line code is AMI or B8ZS for operating T1
The line code is AMI or HDB3 for operating E1
Can use CRC-4 frames while operating E1
- Possible speed while using CAS - 56~1920Kbps
- Possible speed while using CCS - 56~1984Kbps
- Possible speed without using frames - 2.048Mbps
Perfect functional compatibility with CSU equipment made by
other companies
Can make loop back writhing with FLCs of optical subscribers
Can do remote config control
Control, maintain and repair using consol ports
Support TX /RX CLK invert functions to make communication
transmission with various DTEs
Support a function about input and output data invert from DTE
Support various alarming and real-time line error monitoring
functions
(LOS,RED,YELLOW,CRC,BPV)
Various loop back and diagnosis functions
(LTL, DL, RTLB, TPG, LLB, NLB, RCLB)
Choose AC 110V/220V or DC 24V/48V with free volt
Support functions of self-testing, pattern tests and remote control
As an ethernet port, it can be connected to a PC-class
controller or HUB without a router
· Specification
| Classification | Description |
| T1 CSU | |
| Transmit method | 4Wire Full Duplex |
| Frame | ITU-T G.704(D4, ESF) |
| LINE CODE | ITU-T G.703(AMI, B8ZS) |
| Line speed | 1.544Mbps ± 32ppm |
| Line Impedance | 100Ω ± 10% |
| DTE Rate | 56xN, 64xN(N=1~24) |
| Transmit speed | 56Kbps~1,536Kbps |
| LBO | 0dB, -7.5dB, -15dB, -22.5dB |
| Line distance | 1.2Km(24AWG) |
| E1 CSU | - E1 CSU |
| Classification | Description |
| Transmit method | 4Wire Full Duplex |
| Frame | ITU-T G.704(CRC-4, FRAME) |
| LINE CODE | ITU-T G.703(AMI, HDB3) |
| Line speed | 2.048Mbps ± 32ppm |
| Line Impedance | 120 Ω ± 10% or 75 Ω ± 10% |
| DTE Rate | CAS : 56xN, 64xN(N=1~30) |
| CCS : 56xN, 64xN(N=1~31) | |
| Transmit speed | CAS : 56Kbps~1920Kbps |
| CCS : 56Kbps~1984Kbps | |
| LBO | NO |
| Line distance | 0.8Km(24AWG) |
| E1, T1 Common spec | - E1, T1 Common spec |
| Line Interface | RJ-48 or Terminal Block |
| System Clock | Internal, Receive(LOOP), External(EXT) |
| DTE Interface | Support V. 35 cables depending on ITU-T V.35, RS-232 (option), 10/100 Ethernet Port/ environment |
| Power consumption | AC 110V/220V 60Hz(13/9W) or DC 24V/48V |
| Temp | 0℃ ~ 50℃ |
| Size | 205(W)x300(D)x47(H) |
BR-CSU153(ETH)
CSU
BR-CSU153(ETH) is single-port fractional T1/E1 and CSU equipment which can be connected to T1/E1 service. It has a transmission speed enabling synchronous data channels and programs. The usable speed is 56Kbps / 64Kbps or higher. This system can transmit signals of voice, data and video to users who need transmission bandwidth of 1.544Mbps in case of T1 and 2.048Mbps in case of E1 after dividing them with N×24, N×30/31 multiples. Eff ective data of DTE are sent carried in TimeSlot corresponding to T1 or E1 data fl ow. BR-CSU153 (ETH) is highly compatible with other systems and has remarkable expandability of DTE interface. It also can be applied to various forms of communication through adding Ethernet ports.
· Network Diagram
· Product Features
Fractional T1/E1 Interface
Choose transmission speed between Nx56 or Nx64k bps
It is possible to control and repair and maintain front panels
and consol ports
Can operate D4 (SF) or ESF frames while operating T1
Can operate ESF with CRC-6 frames while operating T1
The line code is AMI or B8ZS for operating T1
The line code is AMI or HDB3 for operating E1
Can use CRC-4 frames while operating E1
- Possible speed while using CAS - 56~1920Kbps
- Possible speed while using CCS - 56~1984Kbps
- Possible speed without using frames - 2.048Mbps
Perfect functional compatibility with CSU equipment made by
other companies
Can make loop back writhing with FLCs of optical subscribers
Can do remote config control
Control, maintain and repair using consol ports
Support TX /RX CLK invert functions to make communication
transmission with various DTEs
Support a function about input and output data invert from DTE
Support various alarming and real-time line error monitoring
functions
(LOS,RED,YELLOW,CRC,BPV)
Various loop back and diagnosis functions
(LTL, DL, RTLB, TPG, LLB, NLB, RCLB)
Choose AC 110V/220V or DC 24V/48V with free volt
Support functions of self-testing, pattern tests and remote control
As an ethernet port, it can be connected to a PC-class
controller or HUB without a router
· Specification
| Classification | Description |
| T1 CSU | |
| Transmit method | 4Wire Full Duplex |
| Frame | ITU-T G.704(D4, ESF) |
| LINE CODE | ITU-T G.703(AMI, B8ZS) |
| Line speed | 1.544Mbps ± 32ppm |
| Line Impedance | 100Ω ± 10% |
| DTE Rate | 56xN, 64xN(N=1~24) |
| Transmit speed | 56Kbps~1,536Kbps |
| LBO | 0dB, -7.5dB, -15dB, -22.5dB |
| Line distance | 1.2Km(24AWG) |
| E1 CSU | - E1 CSU |
| Classification | Description |
| Transmit method | 4Wire Full Duplex |
| Frame | ITU-T G.704(CRC-4, FRAME) |
| LINE CODE | ITU-T G.703(AMI, HDB3) |
| Line speed | 2.048Mbps ± 32ppm |
| Line Impedance | 120 Ω ± 10% or 75 Ω ± 10% |
| DTE Rate | CAS : 56xN, 64xN(N=1~30) |
| CCS : 56xN, 64xN(N=1~31) | |
| Transmit speed | CAS : 56Kbps~1920Kbps |
| CCS : 56Kbps~1984Kbps | |
| LBO | NO |
| Line distance | 0.8Km(24AWG) |
| E1, T1 Common spec | - E1, T1 Common spec |
| Line Interface | RJ-48 or Terminal Block |
| System Clock | Internal, Receive(LOOP), External(EXT) |
| DTE Interface | Support V. 35 cables depending on ITU-T V.35, RS-232 (option), 10/100 Ethernet Port/ environment |
| Power consumption | AC 110V/220V 60Hz(13/9W) or DC 24V/48V |
| Temp | 0℃ ~ 50℃ |
| Size | 205(W)x300(D)x47(H) |
